Note: In BF 1, when you open the console, you can type in “list”, without quotation marks of course, and then hit return to see a list of all console commands, or read on and check out the complete list below: A Complete Battlefield 1 Console Command List. UIDrawEnable Window.PosX Window.PosY Window.Width Window.Height GameTime.MaxVariableFps. The PC version of the Kingdom Come Deliverance (KCD) allows you to customize certain features. When you're playing KCD, you can use KCD console commands to manipulate some parameters of the game and control the graphics. Activate cheats in KCD: If you've already played KCD during its testing stages, then you may know that there was the. We’ve already listed some great Kingdom Come Deliverance cheats, in the form of console commands that require no mods to activate. For players wanting some basic tweaks, they’re great.
- Kingdom Come Deliverance Console Commands Noclip Script
- Noclip Command Ark
- Noclip Command Roblox
- Noclip Command Skyrim
Cheat Codes
Enabling the Developer Console
If you haven’t already, enable the developer console by going into the Game Settings menu. Scroll down to the very bottom and check the empty box next to Developer Console.
Be sure to relaunch the game afterwards!
Now that you’ve relaunched the game, it should be working now! Hit tab or the tilde ( ~ ) key (the key above TAB) and you should see a HUGE black box encompass more than half of the top part of your screen! Don’t freak out about it. This is the developer console!
Cheat Codes
enablecheats (necessary to use the commands)
Summon HatinTimeGameContent.Hat_Collectible_RouletteToken – Creates a rift token
fly – Similar to ghost, but the player is able to collide with geometry.
ghost – Puts the player into a ‘ghostly’ state where they can fly, pass through geometry, and are not affected by damage
summon – A list of summonable objects can be found here.
walk – Disables fly/ghost Mode
changesize [number] – 1 is default, changes the size of Hat Kid
god – Toggles God Mode, making Hat Kid lose no health when attacked or damaged
slomo [number] – 1 is default, modifies the games speed
teleport – Teleports the player to the surface they are looking at
setspeed [number] – Modifies Hat Kids ground speed and water speed (only seems to work in water)
setgravity [number] – Changes the gravity
open [mapname] – Loads the inputted map (check C:Program Files (x86)A Hat in TimeHatinTimeGameCookedPCMaps) for maps.
setjumpz [number] – Changes your jump height
playersonly – Set the world to only update players, ignoring all other actors
killparticles – Deactivates particle systems and destroys all particles
FOV [number] – Changes FOV to given number (max 170, min 1, default 90)
suicide – Kills Hat Kid
showdebug – Toggles the overall display of properties of the player’s current ViewTarget
restartlevel – Restarts the level
invertmouse – Inverts the mouse vertically
invertturn – Inverts the mouse horizontally
jump – Makes Hat Kid jump (pretty obvious)
duck – Makes Hat Kid duck (pretty obvious)
unduck – Makes Hat Kid unduck
pause – Pauses the game
showmenu – Functions identically to pause
use – Makes Hat Kid interact, or attempt to interact.
freezeframe [number] – Forces the game to pause for the specified
delay time (when tested escape immediately resumes the game)
stat fps – Toggles display of frames per second
showhud – Toggles the visibility of all HUD items.
togglehud – Toggles the visibility of all HUD items.
show particles – Toggles display of particle geometry
show rigidbody – Does something
show collision – Toggle display of collision primitives
show postprocess – Toggle display of post process effects
show staticmeshes – Toggle display of static mesh geometry
show paths – Toggles display of paths or navigation meshes
show volumes – Toggles display of volumes
viewmode unlit – Renders scene with flat shading, i.e., no lighting
viewmode wireframe – Renders scene in a wireframe view
viewmode brushwireframe – Renders scene in a wireframe view showing brush edges
viewmode lightingonly – Renders scene using only the lighting information on the geometry
viewmode lightcomplexity – Renders scene using a special shader that displays the complexity of the lighting on (number of dynamic lights affecting) each surface using specific colors to denote the number of lights
viewmode texturedensity – Renders scene using a special shader that displays the density of texels for the diffuse channel on each surface using specific colors to indicate the density
viewmode shadercomplexity – Renders scene using a special shader that displays the complexity of the material being used by each surface using specific colors to denote ranges of shader instructions
viewmode litlightmapdensity – Renders scene fully lit using a special shader that displays the density of texels for the lightmap on each surface.
viewmode – Returns render mode to normal
toggleui – Toggles updating and display of the UI
exit – Closes the game
disconnect – Takes you back to the main menu
quit – Same as exit
CS: GO console commands contain quite a lot of hidden functionality. You can use them to set an FPS cap, set up a local server, adjust the crosshair, and so much more. All we need is the right keywords and that’s about it.
Now, since most commands only apply on local or remote servers without actually affecting the game, chances are that you can’t break it to the point of no return. Still, keeping a backup is a good idea – just to be safe.
With that out of the way, let’s move on.
How to Enable The Console
The console is disabled by default. All you have to do in order to enable it is:
- Click on the gear icon (Options)
- Go to “Game”
- And change the “Enable Developer Console” option to “Yes”
After that, you should be able to bring up the console both in the game menu and while playing by pressing the tilde “~” button. If that doesn’t work, try using “`’ instead.
The exact button may differ from keyboard to keyboard – depending on its language and layout. But, generally, it should reside under ESC and right next to “1”.
CS: GO Console Commands and Cheats
Let’s kick this list off with some of the most popular commands and chats that one can find. Obviously, cheats can only be used on private servers as cheating in multiplayer is anti-competitive behavior.
cl_showfps [Value]: Displays various statistics about the game including ping, FPS, server tick rate, and more. The value ranges from 0 to 5 with 0 disabling the stats and 5 displaying every bit of available information
net_graph 1: More or less the same thing – except it lists everything
fps_max [FPS]: Limits the frame rate to the specified count. This is especially useful for Laptops that overheat while playing as limiting the FPS also limits the power demands
hud_scaling [Value]: Adjusts the size of the HUD. The value ranges from 0.5 to 0.95
hideradar or drawradar: Hides or displays the radar. Wouldn’t recommend it for those of you who are solo queuing
cl_radar_scale [Scale]: Sets the scale of the radar
cl_righthand 1 or 0: Switches over between left-handed and right-handed view
viewmodel_fov [FOV]: Sets the field of view (FOV)
sensitivity [Sensitivity]: Sets the sensitivity – great for more accuracy
god: Makes you invincible
noclip: Allows you to fly freely and go through walls
sv_cheats 1 or 0: Enables or disables cheats (Only for private servers)
cl_radar_always_centered: Centers the map so that you’ll be able to see everything
voice_scale [Value]: Sets the volume of your teammates. 1 is the default value (You can use decimals for making things quieter)
voice_enable 1 or 0: Enables or disables the team voice chat
cl_show_team_equipment: Displays the equipment that your teammates are carrying
disconnect: Immediately disconnects from the server
quite: Immediately closes the game
CS: GO Crosshair Commands
Feeling comfortable with your crosshair is very important. So, here are a few commands that help with setting it up.
crosshair 0: Removes the crosshair (Wouldn’t recommend. Even the oddest pro setups rely on at least a small dot) Use crosshair 1 to re-enable it
cl_crosshairstyle [Style]: Sets the crosshair style. The available options are:
- 0: Default
- 1: Static
- 2: Classic (CS 1.6)
- 3: Dynamic
- 4: Static classic
cl_crosshaicolor [Color]: Sets the color of the crosshair. The available colors are:
- 0:Red
- 1:Green
- 2:Yellow
- 3: Dark blue
- 4: Light blue
- 5: Custom
Custom crosshair colors can be set by using the cl_crosshaircolor_r [0–255] command for setting the shade of red, cl_crosshaircolor_g [0–255] for setting the shade of green, and cl_crosshaircolor_b [0–255] for setting the shade of blue. Basically an RGB setup to create the ideal color.
Though, if you’re going to go to such lengths only for setting up the color of the crosshair, you may as well install the crashz crosshair generator and be done with it. Still, some people prefer the old fashioned way. So, just do whatever fits you best.
cl_crosshairdot 1: Adds a dot at the center of the crosshair
cl_crosshairusealpha 1 or 0: Enables or disables transparency
cl_crosshairalpha [0-255]: Sets the level of transparency
cl_crosshairgap [Value]: Sets the gap between the lines
cl_crosshairsize [Value]: Sets the size of the crosshair lines
cl_crosshairthickness [Value]: Sets the thickness of the outline
cl_scalecrosshair [Value]: Sets the overall size of the crosshair
Server Commands
If you host your own servers or if you tend to play on locally hosted games every and then, then you’ll definitely want to check out these commands.
mp_friendlyfire 1 or 0: Enables or disables friendly fire
mp_freezetime [Value]: Sets the freeze period
mp_do_warmuptime [Value]: Sets how long warmups last
mp_warmup_end or mp_warmup_start: Immediately ends or starts the warmup
mp_buytime [Value]: This determines how much time the players will have for buying equipment at the beginning of the round
mp_roundtime [Value]: Sets how long each round will last in minutes
mp_restartgame [Optional Value]: Restarts the game. If you set a value in seconds, then the game will only restart after the set amount of time has passed
bot_kick: Kicks all bots out of the game
mp_timelimit [Value]: Sets how long the match can last
mp_limitteams 0: Removes the team player limit
mp_autoteambalance 0: Turns off auto team balance
mp_maxmoney: Sets the maximum amount of money that players can hold
mp_anywhere: Allows players to buy equipment regardless of where they are on the map
mp_forcechasecam [Mode]: Sets the camera mode after death. This is what each number does:
- 0: Free flight
- 1:Default
- 2: Camera stays on the ground after death
Map Commands
Changelevel [Map]: Changes the current map. You need to know the map commands for this one, so, here are some of the most popular options at this moment:
- de_cache
- de_dust2
- de_mirage
- de_overpass
- de_nuke
- de_shortnuke
- de_inferno
- de_train
- de_cbble (Cobblestone)
- de_canals
- de_subzero
- de_shortdust
- cs_office
- de_austria
- de_biome
- de_lake
- ar_baggage
- de_safehouse
- ar_shoots
- de_stmarc
- gd_rialto
If you’re looking for a workshop map, chances are that its console name can be found at its description. Obviously, it’ll have to be installed on your PC first. If the other players don’t have it installed, then it should get automatically downloaded for everyone after you change the map.
Practice Commands
Practicing on a local/private server is arguably the best way to improve certain skills. Things like smoke throws, efficiently peeking certain angles, etc.
These commands give us complete control of the map and the conditions that we’re going to be practicing in. So, take a look.
sv_cheats 1: Enables cheats (You’ll need this in order to use some commands)
mp_do_warmup_period 0: Disables warmup
mp_roundtime [Value]: Sets the duration of each round (Set it to a very high number if you wish to practice smoke throws so that you won’t get interrupted time and time again)
mp_buytime [Value]: Sets how much time you’ll have for buying items
mp_freezetime 1: Sets the freeze time of each round at the beginning to 1 second
mp_timelimit [Value]: Sets a time limit for the whole game
mp_maxmoney [Value]: Sets the maximum amount of money that you can hold
mp_startmoney [Value]: Sets how much money you start with
sv_infinite_ammo 1: Enables infinite ammo (Applies to utility as well)
Kingdom Come Deliverance Console Commands Noclip Script
mp_buy_anywhere 1: Allows you to buy equipment from anywhere on the map
bot_kick: Kicks all the bots from the server
bind [Key] [Command]: Makes it so that the specified key on your keyboard executes a specific command. Comes in handy for quickly toggling commands like noclip. For example, if you wish to make it so that “N” toggles noclip, you’ll have to type bind n noclip
bindtoggle [Key] [Command]: Same thing except you want to use this one for commands that contain 1 and 0 values. voice_enable 1/0 is a great example
Noclip Command Ark
sv_showimpacts 1: Shows you where bullets land (Particularly useful for shooting through stuff and seeing if you find your target)
sv_grenade_trajectory 1: Displays utility trails
Side Note: How to Apply Numerous Commands at Once
Creating an efficient practice server requires us to insert a ton of different commands – from adjusting the time and money settings all the way to enabling things like infinite ammo and noclip.
Noclip Command Roblox
Every time that you open a new local server, all these commands will be reset. That’s why we need a way to execute a set of specific commands as fast as possible.
The easiest way to do that is by creating a cfg file. Here’s all you need to do:
Noclip Command Skyrim
- Open Windows’ Notepad
- Copy and paste any command that you need in there
- Save the file with any name that you want, but make sure that it ends in .cfg
- Place that file to the CS: GO’s cfg folder
- Open the game then launch the local server
- Open the console
- And type exec [filename]
This should execute everything that’s included in the cfg file. Do keep in mind that it needs to be in cfg. If it ends in .txt, then it’s not going work.
Also, when you enter CS: GO’s cfg directory, you’ll notice that there are a ton of other cfg files that get executed automatically. Do NOT touch these. Modifying such things can end up crashing your game in a number of interesting ways.
You can also create another set of commands for things like fps_max. There is the option of making it so that CS will automatically execute a specified cfg file every time you launch the game. To do that:
- Go to Steam
- Right-click on CS: GO
- Properties
- Set Launch Options
- And type -exec [file name]
Wrapping Up
That’s all we have for now. If you think that we forgot to mention any important commands, then let us know about them in the comments section.